top of page

QD3 | Quat Dilution & Monitoring

The first product in this series, the Q3, was developed to simplify the ongoing assessment of the solution along with a clear visual indicator of the general status of the solution and alert when it is time to further check and refresh the solution. Setting the solution in place correctly from the outset, however, is fundamental, and that is the role of the QD3.

QD3b2.jpg

PRODUCT & BENEFITS

COMPACT

The QD3 system is a battery powered compact device that positioned on the side of three compartment sinks (wash/rinse/sanitize) and doses with sanitizer chemistry, assesses the level of quat in solution, and cycles until the target ppm is attained. And, importantly, the QD3 does not connect to the water supply, so no plumbing connections are required.

HANDS-FREE, INTUITIVE

QD3 turns on automatically when placed into water and runs a dosing cycle with a single button press. Upon cycle start, the system doses according to the sink volume, assesses the level of quat in the solution, doses a small amount if required and cycles assessing concentration.

 

With the target concentration attained, a bright green TARGET light illuminates. If the level of quat detected is higher or lower than the target range, red lights illuminate for OVER or UNDER, respectively.

 

QD3 cycles automatically running a solution assessment every three minutes and illuminates the appropriate status lights for five seconds. This cycle continues until four hours have elapsed and then the system flashes all lights until the solution is refreshed to keep within recommended guidelines.

 

SAVE TIME, REDUCE STRESS, MAXIMIZE CUSTOMER EXPERIENCE

The benefit of the QD3 comes from helping to ensure that sanitizing solutions are correct – neither too high nor too low, and that the solution is refreshed in a timely manner.

 

Allows more efficient use of time and aid in maximizing customer experience: Ensuring that the sanitizing solution is accurate becomes the simplest of functions for the operator, reminding them to monitor sanitizing solution concentration and alert when it is time to refresh. In the busy ongoing operation of the business, QD3 removes burden from staff so they may be more productive and place their focus on more customer facing, revenue-improving work.

 

CUT COSTS

One of the more significant aspects influencing costs in three-compartment sink systems is the incorrect use of chemistry. Compounding the issue and increasing cost follows by not refreshing the solution at the appropriate interval or replacing it earlier than needed. QD3 provides a robust, hands-free, cost-effective solution to these challenges.  

sink 1_edited_edited.jpg

Arc Revere technologies provide the tools needed to further deliver the highest perception of care and cleanliness. Whether it’s technology facilitating soft surface sanitizing or assessing the cleanliness of a counter in a deli, Arc Revere has a proven track record of in-depth engineering and innovation.

bottom of page